乳妓h军妓调教hh文,日本大乳av片在线观看,韩国19禁a片在线观看,青春期乳房一抓捏里面有硬块

When we are using a molding machine, or one or several mold temperature machines, the temperature difference of each mold temperature machine itself is actually not very large; what we will talk about next, for the mold temperature machine In terms of speaking, we actually need to pay attention to the fact that we can't directly use the pipeline as a divergence to use it. In this way, we can only guarantee its own quality.

    When using the mold temperature machine equipment, we actually need to pay attention to the best, that is, do not use oil-type equipment; in the following, we actually need to pay attention to the fact that we can not use a large mold temperature machine to adjust the number. The temperature on the sub-model, what I will say next, is actually because the large-scale equipment can not take into account the small-scale equipment.

     Next, for a temperature sensor of the same model, it will actually directly feed back to the thermostat. In this respect, we are also not good at controlling the temperature. When designing the equipment, we should pay attention to the fact that the flow of circulating water should be a turbulent flow.

     When performing maintenance on the mold temperature machine, we actually should pay attention to directly check a flow rate of itself. Next, we actually need to calibrate a thermometer. At this time, In fact, we can directly use a good quality of circulating water, we can not directly inject cooling water or water overflow phenomenon.

     For the maintenance of the mold temperature machine, we actually have to pay attention to avoiding the on-off of the cooling water and the heater directly; in the following, we actually have to pay attention to the fact that we cannot adjust it at will The size of the opening on the valve needs to be fully opened for use; it is not only effective with a mold temperature machine, but in fact, it needs to be complementary to the model design.